How to solve the common problems of laser engraving machine（2）
Laser engraving machine Last article introduced how to solve the common problems of laser engraving machine,In addition to these, there have other solutions. Computer can not output 1. Check the software parameters are set normal. (Re-set) 2. Engraving machine is according to the first positioning and then start the output. (Re-output) 3. Check if the machine is not reset beforehand. (Correct again) 4. Check if the output serial port is the same as the software serial port setting. (Re-edit) 5. Check the ground is reliable, static electricity will interfere with the data line. (Reconnect the ground) 6. Replace the computer serial output test. 7. Re-install the software and reset the test. 8. Format the computer system disk to reinstall the software test. 9. Motherboard serial port damage to be repaired or replaced. Grindstone can not calculate the work path. 1. Check if the setting work path is calculated correctly. 2. Check if the ...