Stylecnc

Laser engraving machine Last article introduced how to solve the common problems of laser engraving machine,In addition to these, there have other solutions. Computer can not output 1. Check the software parameters are set normal. (Re-set) 2. Engraving machine is according to the first positioning and then start the output. (Re-output) 3. Check if the machine is not reset beforehand. (Correct again) 4. Check if the output serial port is the same as the software serial port setting. (Re-edit) 5. Check the ground is reliable, static electricity will interfere with the data line. (Reconnect the ground) 6. Replace the computer serial output test. 7. Re-install the software and reset the test. 8. Format the computer system disk to reinstall the software test. 9. Motherboard serial port damage to be repaired or replaced. Grindstone can not calculate the work path. 1. Check if the setting work path is calculated correctly. 2. Check if the ...

CO2 laser head The laser does not emit light. 1. Press the control panel test button to check the ammeter status: a. No current: Check the laser power is turned on, the high voltage line is loose or off, the signal line is loose. b. Have current: Check the lens is broken, the optical path is a serious shift. 2. Check the water circulation system is normal: a. No water: Check the water pump is damaged or not energized. b. Have Water: check the water inlet, water outlet is reversed or water pipe rupture. 3. Can self-test, send data does not light: Check the computer settings are correct. 4. Check the cover and the front door of the magnetic switch and lines are loose, fall off CO2 laser tube Carving different depths or not deep. 1. Check the water circulation system is smooth flow. (Water pipe bend or water pipe rupture) 2. Check the focal length is normal. (Readjust) 3. Check the light path is normal. (Readjust) 4. Check paper on th...